Bond’s Staples: The Right Staple for the Job

ProDrive HD staples

One of the products in Bond’s Pro Drive HD™ line that we haven’t yet talked about is our staples. Bond carries several types of staple guns and a wide variety of staples as well. Here we will list the types of staples, what their best uses are, and which staple guns they are suitable for use with. 

Staple Guns

Bond offers a hand stapler and a pneumatic stapler. 

The SSTGU81 Gunlach Heavy Duty Hand-binding Stapler #81 is a quality hand stapler. In the carpet industry, it’s used to attach 1½” binding tape to carpet and will staple the tails on corners because it will staple at any angle. Many people also use it in the flooring industry and for fabric and paper. Its curved handle reduces quick soreness that can result from use. 

Use the SSTGU248 24/8 5/16″ Galvanized Staples with the Gunlach stapler. They are 5/16” in length and come in a package of 5000 staples. 

We talked about why a pneumatic stapler is such a useful tool back in January. The pneumatic stapler we have available to purchase is the 18 GA Underlayment Stapler with Extra Capacity Aluminum Magazine. This stapler is used for flooring installation and has a bump/single fire operation and a fast jam release. Use GA staples from 7/8″ to 1-9/16″ in length with this stapler. 

If you would like to use this stapler out of the box in one package deal with the necessary staples, we offer that too. 

The Right Staple for the Job 

Here are the types of staples we have available for sale, along with what they are used for: 

15-1/2 GA 1-1/2″ Flooring Staples 10,300 ct per box 

15-1/2 GA 1-3/4″ Flooring Staples 9,000 ct per box

15-1/2 GA 2″ Flooring Staples 7720 ct per box

These flooring staples are used for 3/4″ hardwood or Maple flooring applications into wood sub-floors. They are E-G galvanized for rust resistance but not recommended for ACQ-treated lumber. Over time these staples may corrode, due to galvanization thickness. They are not intended to prevent rust on exterior applications. To ensure maximum protection, use stainless steel type 316 staples.

These staples perform. They will meet any manufacturer’s quality standards. We guarantee that they will fit 15-1/2 GA flooring tools, including Stanley Bostitch® tools or we will give you your money back.

The following staples have a blunt chisel point. They are thinner than a 15.5 GA staple or a 16 GA L-cleat and have a reduced chance of splitting. They are E-G galvanized to protect from rust. These are the most cost efficient staple we offer. 

18 GA NC1000L13D 1″ Premium  steel 1/4″ Crown Staples 5,000 CT – This staple is similar to Duo-Fast® 1832 and fits ALL Duo-Fast® SureShot Staplers models plus Hitachi® N3804AB3 & Spotnail® WS4840 & TC4825. It fits most 18 gauge 1/4″ narrow crown staple tools including: BeA®: 90/38-150 / Bostitch®: S32SX, SX150, T40SX-CT / Craftsman®: 18300, 18306,18367, 18406, 18435 / Duo-Fast®: KN1848, KN1848A, KB1836, KS7648 / Fasco®: F20P 90-40 / Hitachi®: N3804AB / Jamerco®: JTS061825, 1838a, 1838H / Makita®: AT638 / Porter-Cable®: NS100, NS100A, NS150 / Senco®: A100LS, A150LS, SKS-L, SLS20-L, SLS25L, SLS25XP / Spotnails®: @WS4840, FS4825.

It WILL NOT FIT : Paslode® 3/16″ Crown Staplers.

18 GA NC0875L12D 7/8″ Underlayment Staples 5,000 CT – This staple is similar to Duo-Fast 1828 and fits ALL Duo-Fast® SureShot Staplers models plus Hitachi® N3804AB3 & Spotnail® WS4840 & TC4825. It fits most 18 gauge 1/4″ narrow crown staple tools including: BeA®: 90/38-150 / Bostitch®: S32SX, SX150, T40SX-CT / Craftsman®: 18300, 18306,18367, 18406, 18435 / Duo-Fast®: KN1848, KN1848A, KB1836, KS7648 / Fasco®: F20P 90-40 / Hitachi®: N3804AB / Jamerco®: JTS061825, 1838a, 1838H / Makita®: AT638 / Porter-Cable®: NS100, NS100A, NS150 / Senco®: A100LS, A150LS, SKS-L, SLS20-L, SLS25L, SLS25XP / Spotnails®: @WS4840, FS4825.

It WILL NOT FIT : Paslode® 3/16″ Crown Staplers.

18 GA NC1250L15-8 1-1/4″ Premium  steel 1/4″ Crown Staples 5,000 CT – This staple is similar to Duo-Fast® 1840. It fits ALL Duo-Fast® SureShot Staplers. It fits most 18 gauge 1/4″ narrow crown staple tools including: BeA®: 90/38-150 / Bostitch®: S32SX, SX150, T40SX-CT / Craftsman®: 18300, 18306,18367, 18406, 18435 / Duo-Fast®: KN1848, KN1848A, KB1836, KS7648 / Fasco®: F20P 90-40 / Hitachi®: N3804AB / Jamerco®: JTS061825, 1838a, 1838H / Makita®: AT638 / Porter-Cable®: NS100, NS100A, NS150 / Senco®: A100LS, A150LS, SKS-L, SLS20-L, SLS25L, SLS25XP / Spotnails®: @WS4840, FS4825.

It WILL NOT FIT : Paslode® 3/16″ Crown Staplers.

The following staples are made of premium graded steel. They have an improved point, superior strip integrity, and holding power and do not bend or break. 

20 GA 5010D 5/16″ Divergent PAD Staples 5,000 CT – This staple is compatible with: CS-500 Duo-Fast®, EWC-5018A Duo-fast®, HT-550 Classic Duo-Fast®, SureShot®5020 DLAF Duo-Fast®, SureShot® 5020 S Duo-Fast®, SureShot® 5020 Duo-Fast®. OLDER MODELS: CT-859A, EWC-5018, HT-550, JP-5020, JP-5020 DL, JS-5020 DL. 

A-11D 3/8″ Hand or Electric staples 5,000 CT – This staple is equal to Arrow T50. Use this with Slap Stapler– Interchangeable with Senco® A-11, Duo-Fast® A-11, Rapid® 11, JK671. It fits Arrow® CT50K, ETFX50, ETF50BN, ETN50, HT50, T50PRN, ET50, ETC50 Electric Staple Guns. Air Staple Guns Fasco® F1B A11-16, AUTO, L/M. 

19GA 7512D 3/8″ Divergent PAD Staples 5,000 CT– This staple is for use with HT-755 Duo-Fast® series 3/8″ x 15/32″ Crown.

20GA 5418D 9/16″ Divergent Electric Staples 5,000 CT (14MM) – This staple is GUARANTEED to fit all 5400 & 5418 SERIES & Older Models: BN-54245, BND-5424 SP284, ENB-5418A, ENC-5418A SP330, ENC-5418A SP330A, ENC-5418A. 

The final two types of staples we offer are: 

16 GA 7/16″ Crown Staples “N” WIRE Available in DIFFERENT LENGTHS – This staple is ideal for sheathing, soffits, underlayment, lattice, cabinets, case backs, drawers, and more. It’s electro galvanized and made to fit Senco N series and Hitachi, Porter Cable and similar N WIRE staplers. It’s similar to Senco® N17BAB staples and available in sizes 3/4″, 1″, 1-1/4″, 1-1/2″. These above lengths are 7/16″ crown x 3/4″ leg,16 gauge. 

3/8 Arrow Electric Gun Staples 3/8″ #T50 – This is a 3/8″ | 10 mm staple that’s great for carpeting, plywood, lattice, and paneling. It comes in boxes of 5,000 staples. 

Bond’s Staples – “Superior Products At The Right Price©” 

As you can see, we have a full line of staples and quality staplers to meet your needs. If you need staples, staple guns, mallets, mallet caps, L-cleats, or finish nails for your flooring project, shop our Pro Drive HD™ line of supplies or call us at 1-888-800-BOND with any questions. We will be happy to help you. 

0 Comments

Leave a reply

live chat service provider
X

Happy Halloween!

Spend $50.00 or more to save 10%

Enter code: SPOOKY2020

Excludes package deals

¤